answersLogoWhite
Spark Plugs and Wires
Chevy Blazer S-10
Ford Ranger XLT
Honda Civic DX

What is the correct spark plug order for a 1991 Honda civic?

101112

Top Answer
User Avatar
Wiki User
Answered 2007-09-26 03:14:55

From left to right on top of the engine, it goes 4 3 2 1, also make sure they are tight ater installing them!

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


What is the spark plug gap for a 1992 honda civic. .


What is the proper spark plug wire placement routing to the distributor for a 1994 Honda civic cx


how to change spark plugs in 2004 honda civic lx?


The spark plug gap for a 1989 Honda Civic LX is .044" (1.11mm).


The Honda Civic has four spark plugs, one for each cylinder.



The firing order for a 2000 Honda Civic 1.6 liter 4-cylinder is 1342. The recommended spark plug gap is .044 (in thousandths of an inch).


gap on sparkplug for 2007 honda civic si


The spark plug gap for a 1994 Honda Civic should be set at .044 inches. This gap will be preset at the factory for new spark plugs.


The firing order is as follows: cyl1--cyl3--cyl4--cyl2.............(1,3,4,2)


The spark plug gap for a 1989 Honda Civic with a 1.5 liter engine should be set at .044 inches. Most Honda engines have a spark plug gap of .044 inches.


If a 1997 Honda Civic will not star there may be an issue spark. When there isn't enough spark to ignite the fuel the car will not turn on.


http://henklin.ridethepig.com/Civic/firing_order/



The 2002 Honda Civic EX engine uses coil-on-plug. There are no sparkplug wires.


The distributor wiring order for a 1996 Honda Civic is 1-3-4-2. The distributor will be have the wires in the clockwise position starting a 1.


Click the link and choose the correct engine.


Take the old spark plugs out and screw the new ones in


The spark plug gap for a 1999 Honda Civic LX is 0.044. You can use a plug gap tester to check the proper gap. You should always check the gap on all spark plugs prior to replacing the spark plugs.



check the gappings of your spark plugs, it must be uniform.




It is on the crank case cover. Basically on the top of the motor.


Most plugs are pre gapped. You can also check the emissions sticker under the hood or the car's manual, it should have the correct gap settings.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.