i had so many problems with my 95 civic.
find urself a cheap reliable mechanic. if you live in Scotland i may know a guy that could help you.
cant help u with the O2 sensor.
This is a major repair that should only be attempted by a professional. This is not a DIY repair for a novice.
Have a 94 Honda Civic LX. Radiator develope a hole and overheated the engine. Dealer quoted price of $1900 to replace cylinder head gasket, valve covers, timing belts, water pump (other things as well). Plus replace radiator. Cost includes sending out gasket for surfacing.
The speed sensor on a 1994 Honda Civic is located on top the of the transmission. To replace it unplug the sensor from the wire harness then the remove mounting bolts and assembly from the transmission.
The O2 sensor on a Honda Civic is found on the exhaust system. It will be mounted near the catalytic converter. Simply unscrew the sensor from the exhaust pipe and unplug it from the wire harness. Replace with a new unit.
i dont no
The speed sensor is found on the transmission of the 1992 Honda Civic. To replace the unit locate the mounting bolts and remove them. Unplug the wiring clip and pull the sensor off.
Do you like the car? Can you replace the car for cost of repair? How long do you plan on keeping the car? What is general condition of vehicle?
If you have to ask, take it to a shop, or sell the car, because it will cost you
Replace the VSS (Vehicle Speed Sensor) in your transmission. It is the same part number for an automatic transmission and a manual transmission in those year models.
My wife is paying 441.00 for her Honda civic '05.
The oxygen sensor on a Honda Civic is replaced by disconnecting the wiring harness and removing the sensor using a socket wrench. Anti-seize paste is applied to the threads, a new sensor is torqued into place, and the wires reconnected.
Remove the vacuum hose from the sensor. Remove the sensor retaining screws. The sensor will come off. Reverse the process to install the new sensor.
9 time out of 10, the heater circuit internal to the sensor has failed. Replace the sensor.
problem is not sensor but is in wiring to sensor or computer
It should take about 8 hours give or take...
Idk about the 99 civic but on my 95 jdm d15 the crank shaft position sensor is in the distributor. If the sensor is bad then you must replace the whole distributor. A bad wire could also cause this problem. Hope that helps good luck. jdmd15crx
Replacing a head gasket on a 1.5 liter Honda Civic requires removal of many of the engines components such as the intake manifold, valve cover, and timing belt. After removing the head from the engine it needs to be resurfaced. Replace the old head gasket and machined head onto the block and reinstall all the other components.
Diagrams for a 1993 Honda Civic brake system can be found the factory service repair manuals. These manuals will also explain in detail how to properly replace and repair the brake components.
Drop the header pipe and unbolt the oil pan and drop it.
I would say around 300 dollars..
i want to now how much it is to repair a Honda civic type r clutch 2003/2004 model
The 1992 Honda Civic head gasket creates a seal between the head and engine block. The head gasket is made of a hard metal.
the map sensor is located on top the intake manifold and reads off map sensor just disconnect wire then get a Philips screw driver and take off then replace and put back on
that's easy.......have a willing friend fix it for ya or get eaten alive at a shop