ITS AN NPN TRANSISTOR , GENERALLY USE AS A SWITCH GENREALLY IN COMMON EMITTER CONFIGURATON
both r same, difference is only in part number.
S stands for "slew" and L for "high power high frequency".
Bc 107b
The SL100 transistor has a TO-39 case. In the TO-39, the emitter is closest to the tab, and the collector is furthest away from the tab.
General Purpose Medium Power NPN Transistor
i dont know exactly but i like to share what i know.... transistors are named as BC,BD,AF,SL,AC,BL..etc they are different from each other based on the amplification factor,maximum voltage can be applied,breakdown voltages,gain.......... i would make this answer better with reference......
The SL100 is a PNP medium power transistor, suitable for use up to ~100MHz. This can be used in the power amplifier stage, with the output connected to a tuning network/transformer + antenna for AM modulation. It's purpose, if used in this application, is to supply current (usually a voltage amplifier circuit will precede this one) to drive the antenna.
One has SL in it name the other has CL plus an S at the end.
yes.
What is the equivalent component to use in place sl100 transistor? ...
sl100
It is an npn power transistor
The SL100 transistor has a TO-39 case. In the TO-39, the emitter is closest to the tab, and the collector is furthest away from the tab.
This mechanism is how a transistor works.
SL100
General Purpose Medium Power NPN Transistor
The pin configuration of sl 100 is B C E with ground as the base of the transistor.
i dont know exactly but i like to share what i know.... transistors are named as BC,BD,AF,SL,AC,BL..etc they are different from each other based on the amplification factor,maximum voltage can be applied,breakdown voltages,gain.......... i would make this answer better with reference......
SL100 NPN transistor can provides enough current gain (500mA) to drive the relay coil. So when our relay coil is drive by proper current & voltage it will works. For more info about SL100 please read manufacture datasheet. Wireshark Cookie Dump: OKCancel
S stands for slew and L stands for low frequency... and 100 is the gain of the transistor