0
What is the difference between a master oscillator and a slave?
Wiki User
∙ 15y ago
The master is a more precise frequency source which other less precise oscillators in a system can synchronize with.
Modern terminology replaces Master/Slave with Primary/Secondary, same function.
P/S relationships are most visible in today's radio clocks which sync with WWV time standard by radio signals when they can, but can maintain acceptable accuracy, usually during the day when there is no skywave activity.
In the LORAN system there is a similar P/S relationship where all the secondaries sync their oscillators with Primary, and can run with acceptable accuracy when they lose Primary for short periods of time.
Likewise GPS recievers have oscillators which sync with the satelites which sync with ground stations.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the meaning of Master-slave communication protocol?
A master-slave communication protocol allows hardware components to communicate between them. A component is either a master or a slave. A master initiates the communication and sends requests. A slave only receives the requests, acknoledges, threats and sends a response. A slave cannot initiates a communication.
Is man the master or slave of modern technology?
slave
What is the main difference between normal JK flip flop and master slave JK flip flop?
A normal JK flip-flop has the output change state based on the input on the leading edge of clock, while the master-slave variety predetermines the output on the leading edge of clock and then effects the actual change of the trailing edge of clock, making it impervious to race conditions.
Why does the master slave J-K flip flop not requires an edge trigger while the J-K flip flop does?
The master slave has two flip flops, a master stage and a slave stage. The master stage is committed on one transition of the clock, while the slave stage is committed, based on the master stage's state, on the next transition of the clock. This eliminates race conditions, unless the clock pulse is so narrow as to make them become an issue again.The non master slave, however, bases its output state on the JK inputs just prior to one clock edge. In this respect, its somewhat no different than the master slave variant, except that the output in the master slave is committed prior to actually changing state, whereas the output in the non master slave is committed very close to its actually changing state. The problem is simply one of design - if the input is a function of output, then race conditions in the non master slave can make the output indeterminate, and that is poor design. No ifs, ands, ors, buts, or maybes. :-)>
Difference between asymmetric and symmetric multiprocessing and simple multiprocessors?
A symmetric multiprocessing (SMP) system is one in which each processor runs an identical copy of the operating system on each processor. In an asymmetric multiprocessing, system, each processor is assigned a specific tasks. An example of this would be a master- slave relationship between one processor and “the rest”.
What is the difference between a master bus and a slave bus?
none
What is the difference between master and slave setting for a hard drive?
The difference is very technical... One of the devices, called the "master", is in control of the data transmission, the other one "obeys". All you really need to know is that if one device is the master, the other must be the slave. It doesn't matter much which is which.
What is the difference between a master cylinder and slave cylinder?
The primary difference between a master and a slave cylinder is which one make the other one work. We operate the master cylinder to make the slave cylinder work. The master cylinder on a hydraulic clutch is actuated by pushing on the clutch pedal. The hydraulic pressure then makes the clutch slave cylinder move and it pushes out to give the throw-out arm a shove. This will disengage the clutch from the flywheel (by actuating the pressure plate). the master cylinder is on the fire wall its the main one, when you push on the brake pedal down it pushes on a rod in the master sylinder. the wheel cylinders (slave) are on the dram drums. they push the brake shoes to the drum
What is the difference between a transparent flip flop and a master slave flip flop?
I never heard of transparent flip flop and i think it refers to a 'd' flip flop where the output will follows the input with the clock. a master slave referred as j-k do not follow the input not until the master tells the slave to flip
What is the difference between slave morality and master morality according to Friedrich Nietzsche?
Nietzsche described master Morality is some kind of honor, creator of values, art, nobility...while slave Morality is friendship, and compassion. Slave morality speaks against power believes it to a negative. For Nietzsche, master morality is detrimental to freedom.
What is the difference between master IDE and slave IDE?
In computing, the terms "master IDE" and "slave IDE" refer to the primary and secondary IDE devices connected to the IDE bus on a motherboard. The master IDE device is the main drive that controls the bus and handles data transfers, while the slave IDE device is a secondary drive that operates under the control of the master device. Each IDE channel can have one master and one slave device connected to it.
Quotations from Robinson Crusoe about the relationship between man and nature?
the ralationship between robinson crusoe and friday seemes to be like the relationship between master and slave crusoe is the master and friday in the slave he should serve his master as soon as he lives
What is the meaning of Master-slave communication protocol?
A master-slave communication protocol allows hardware components to communicate between them. A component is either a master or a slave. A master initiates the communication and sends requests. A slave only receives the requests, acknoledges, threats and sends a response. A slave cannot initiates a communication.
How are slavery and indentured servitude alike?
Slavery and indentured servitude involve individuals working against their will, typically in service to someone else. Both systems deprive individuals of their freedom and subject them to harsh living and working conditions. However, in indentured servitude, individuals may have a contract specifying the terms of their labor and eventual release, whereas slavery typically involves lifelong bondage without such contractual agreements.
What is the difference between an enslaved servant and a slave?
An enslaved servant typically refers to someone who is forced to work for an owner, often under oppressive conditions but may have some limited rights or freedoms. A slave, on the other hand, is considered the legal property of another person and has no rights or freedoms.
What is the difference between distributed and replicated database?
In a distributed database, data is divided and stored across multiple nodes in a network, while in a replicated database, data is duplicated and stored across multiple nodes for redundancy and fault tolerance. Distributed databases focus on partitioning data for scalability and performance, whereas replicated databases focus on ensuring data availability and reliability.
Was William Wells Brown a slave master?
No, he was a slave who escaped from his master.
