In the normalising metal treatment process, the metal is cooled slowly and gradually while in quenching metal treatment process the metal is called very fast and abruptly.
The fluid for quenching is specific for each type of steel; choosing an inappropriate fluid lead to bad results.
stopping the ionization cascade modern geiger-muller tubes use a halogen gas for quenching
it is used for quenching of the geiger-counter
What is the difference between herds and packs?
Difference between collenchyma and chlorenchyma
That is the correct spelling of "quenching" (eliminating, extinguishing).
Color quenching is the attenuation of photons produced by a scintilator due to absorption and scattering. This effect, combined with the chemical quenching (attenuation of the transfer of energy from the solvent to the scintillator gives the total quenching effect of the scintillator/solvent mix.
The essential difference between soft iron and hard iron is in the crystalline structure of the metals. This is sometimes due to the presence of impurities, but the over-riding effect is that of heat treatment. The basic techniques (for iron) are to get it white-hot, then cool it slowly; this produces soft iron. Alternatively, get it dull red, or bright red, or yellow, or white, then plunge it into cold liquid. This process, called quenching, hardens the iron. Picking the correct colour before quenching gives just the hardness needed.
The fluid for quenching is specific for each type of steel; choosing an inappropriate fluid lead to bad results.
Quenching your thirst ;)
stopping the ionization cascade modern geiger-muller tubes use a halogen gas for quenching
to avoid the high internal stresses caused by quenching and to get tempered Martensite that is less brittle
quenching quiet
quenching
As happens with voltage and current, flux is steady for dc but keeps altering for ac. A transformer works through the ac flux in the magnetic core.
Re-scaling or (for selected vales of the same number) normalising.
quenching means (the act of extinguishing; causing to stop burning) "the extinction of the lights"