A silicon diode has a voltage drop of approximately 0.7V, while a germanium diode has a voltage drop of approximately 0.3V. Though germanium diodes are better in the area of forward voltage drop, silicon diodes are cheaper to produce and have higher breakdown voltages and current capabilities.
The silicon diode (unless its a Schottky diode) conducts at approximately 0.6 volts. The germanium diode, however, conducts at a much lower voltage, typically 0.2 volts. This means that the germanium diode is better at small signal rectification applications, such as AM radio detectors, allowing a smaller tuner tank circuit.
the cut in vol for silicon diode is 0.7 where as germaium is around 0.3 because of their construction( the ratio of majority n minority carreirs)
97f
germenium diode contains majority electron as a charge carriers while the silicon diode contains holes as a majority charge cariers,
0.3v as opposed to the silicon 0.6v
The silicon diode (unless its a Schottky diode) conducts at approximately 0.6 volts. The germanium diode, however, conducts at a much lower voltage, typically 0.2 volts. This means that the germanium diode is better at small signal rectification applications, such as AM radio detectors, allowing a smaller tuner tank circuit.
the cut in vol for silicon diode is 0.7 where as germaium is around 0.3 because of their construction( the ratio of majority n minority carreirs)
97f
silicon diode is preferred more when compared with germanium diode because in silicon diode the operating voltage is 0.7v where as in germanium diode the operating voltage is 0.3v , germanium is temperature sensitive so it can be easily destroyed by increasing temperature hence silicon diode is preferred more
The entire 1N40xx series of power diodes are all silicon. The OA79 small signal diode is germanium.
Potential barrier of silicon is 0.7, whereas potential barrier of germanium is 0.3
the cut in vol for silicon diode is 0.7 where as germaium is around 0.3 because of their construction( the ratio of majority n minority carreirs)
germenium diode contains majority electron as a charge carriers while the silicon diode contains holes as a majority charge cariers,
There is no exact substitute for a germanium diode, except another germanium diode. However if the only concern is to get a lower forward voltage drop than that of a silicon diode (0.7V), then a schottky barrier diode may be a suitable replacement as its forward voltage drop (<0.1V) is even lower than that of a germanium diode (0.2V).
0.3v as opposed to the silicon 0.6v
Simple, Use the multi-meter , switch to the diode option then connect the positive wire to the positive of diode n negative to the negative ( +ve wire red, -ve wire black) if the there is a reading of =~0.7V then it is silicon. and if it is =~ 0.3V then it is germanium.
Silicon = 0.7v : Germanium = 0.3v