0
What is the drive cycle for 2000 Saturn Body style 4DSD model SSL?
Wiki User
∙ 15y ago
A complete drive cycle for any computer controlled vehicle is cold-starting the vehicle, running the engine to full operating temperatures(this may require driving the vehicle), then turning the vehicle off and allowing the engine temperature to completely cool down again.
Performing a GM OBDII Driving cycle:
# Cold Start. In order to be classified as a cold start the engine coolant temperature must be below 122°F (50°C) and within 11°F (6°C) of the ambient air temperature at startup.
Do not leave the key in prior to the cold start or the heated oxygen sensor diagnostic may not run.
# Idle. The engine must be run for two and a half minutes with the air conditioner on and rear defroster on. The more electrical load you can apply the better. This will test the O2 heater, Passive Air, Purge "No Flow", Misfire, and - if closed loop is achieved- Fuel Trim.
# Accelerate. Turn off the air conditioner and all the other loads and apply half throttle until 55mph (88km/hr) is reached. During this time the Misfire, Fuel Trim, and Purge Flow diagnostics will be performed.
# Hold Steady Speed. Hold a steady speed of 55mph (88km/hr) for 3 minutes. During this time the O2 response, air Intrusive, EGR, Purge, Misfire, and Fuel Trim diagnostics will be performed.
# Decelerate. Let off the accelerator pedal. Do not shift, touch the brake or clutch. It is important to let the vehicle coast along gradually slowing down to 20 mph (32km/hr). During this time the EGR, Purge and Fuel Trim diagnostics will be performed.
# Accelerate. Accelerate at 3/4 throttle until 55-60mph (88-96 km/hr). This will perform the same diagnostics as in step 3.
# Hold Steady Speed. Hold a steady speed of 55mph (88km/hr) for five minutes. During this time, in addition to the diagnostics performed in step 4, the catalyst monitor diagnostics will be performed. If the catalyst is marginal or the battery has been disconnected, it may take 5 complete driving cycles to determine the state of the catalyst.
# Decelerate. This will perform the same diagnostics as in step 5. Again, don't press the clutch or brakes or shift gears.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How much petrol would you use to travel 44 miles?
None, if you cycle! If you drive, it depends on the fuel efficiency of your vehicle and your driving style.
What is the body style of the Saturn Sky?
The Saturn Sky has a roasster coupe body style. It looks a little like a mixture between a Porsche and a Lamborghini.
How tall do you need to be to drive a 500cc motorcycle?
That will depend greatly on the model and style of the motorcycle. Some are much lower than others.
what is your favorite color of the Saturn car?
White or red would have to be my favorite color for a Saturn, I think those two colors really make the most of the Saturn's style.
Does roman god Saturn carry something?
Saturn is a Titan, and yes, he carries the same style of scythe/sickle that Cronus, his Greek counterpart, does.
Drive in Style by Car Detailing in Portland Will Make your Ride Stand Out!?
Drive in Style by Car Detailing in Portland Will Make your Ride Stand Out!
What actors and actresses appeared in Style Test Drive - 2009?
The cast of Style Test Drive - 2009 includes: Naja Hill as Herself - Host
What does the model of the car refer to?
the style of the car
What does the model of the car referred to?
the style of the car
What does the model of a car refer to?
the style of the car
What are learning styles in human resource development?
Learning styles in human resource development refer to the different ways in which individuals prefer to acquire and process new information. Common learning styles include visual (learning through seeing), auditory (learning through hearing), and kinesthetic (learning through hands-on activities). Understanding these styles can help HR professionals tailor training programs to better suit the needs of employees.
How do you tell if a marlin model 60 is an old or new style?
Some of the distinguishing markers to look for in a Marlin model 60 are whether the ejector is casted into the feedthroat and the firing pin style. By identifying these parts you can determine if the gun is an old style or a new style.
