By using a side post adapter. I'm going to guess it's a GM? If the battery bolt is longer, such as in a truck, use the GM long side terminal adapter, if it's a car you'll most likely want the GM short side terminal adapter. This is a much better method than trying to sandwich a ring terminal between the battery and the battery cable.
hook a ground up to your battery and mount it to the amp and hook it up with a few more things and yea you got it man
You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
You can hook up a battery and 240v 12v heavy duty charger system,that is the easiest way to get over that problem. The charger has to deliver enough amperage to cover the load from the winch.RegardsJohn Cas
It has to be direct current, like what a car has or what a battery uses. It won't work plugged into an outlet at your house. That's Alternating Current (AC). So just hook it up to the positive lead to your battery and ground it to somewhere on your chassis.
hook a battery to it
Hook positive up first, negative last.
With some difficulty. Easiest way would be with three lights connected in series, shining at the same time.
it means you can only hook up 4 speakers
Hook up a battery charger to it.
Yes you would hook the audio line into the amp then to the speaker from there.
A person can hook up a cooling fan to a battery by connecting the hot or positive lead to the positive side of the battery. The negative lead wire is then connected to the negative side of the battery.
If you mean there ain't one you need to run a wire strait from the battery and hook it up to the yellow(that is if it's on an after market stereo), That's the easiest way to fix ur prob.AnswerIf you mean there ain't one you need to run a wire strait from the battery ( be careful and run the wire then hook it up to the batt. so u don't ground out the batt. wich could cause fire.) and hook it up to the yellow(that is if it's on an after market stereo), That's the easiest way to fix ur prob.