With a micrometer.
7/8 diameter drill or .875
A hand drill is scommonly used for holes under 1/4 in in diameterANS 2 - The diameter is simply the width of the drill bit from side to side.
Depends on the pitch: Fine pitch: m10 * 0.75 pitch , drill diameter = 9.25 mm m10 * 1.0 pitch , drill diameter = 9.00 mm m10 * 1.25pitch , drill diameter = 8.8 mm Coarse pitch (most common use): m10 * 1.5 pitch , drill diameter = 8.5 mm
.0995"
Depends on the diameter of the conduit. Try for 1/4" larger diameter drill bit.
Diameter drill is drilling.
It is the easiest way to find oil deposits.
This variable speed drill is for drilling different diameter chose different speeds. Workpiece material in the drill speed is important.
For a cut tap the correct drill size is a #17 drill, which has a diameter of .173 inches.
A hammer! A pneumatic drill! Anything other than a compass and a straight line (unmarked ruler).
This variable speed drill is for drilling different diameter chose different speeds. Workpiece material in the drill speed is important.
Diameter = 1 BECAUSE diameter = 2 x radius