There are no shortcuts for this job. The ignition module is located on the iginition coil pack. The coil pack is located on the engine block on the firewall side. Just follow the plug wires down to the coil pack, it is in a tight space. Feel around and find the 10 mm bolts holding the coil pack on. Take off and mark the plug wires so you know how they go back on. After you get the bolts out and it is loose watch out there is a black tube that fits into the engine it is about three inches long, if the tube has a crack in it replace it, this is the crank position sensor. Replace just like you took it off.
The fastest way is to start disconnecting the negative battery terminal, remove the cooling fan which is held by four self threaded screws, remove the three connectors in the module and then take it down removing the three bolts that hold it to the engine block. The entire procedure takes about 15 minutes.
do I remove steering wheel to change out ignition
How do you change the ignition coil on a peugeot 406 coupe?
howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy
ignition switch
How change my ignition switch nissan 2001 sentra.
how do i change a ignition cylinder on a 01 Monte Carlo
How change ignition switch in Lexus ES 300
How do i change the ignition switch in a 1988 Chevy camaro
You don't. You change the ignition switch.
how to change manual ignition switch on a 93 Honda accord
The ignition switch should be separate from the ignition key/lock assembly, so I'll say no.