The firing order is: 1-2-3-4-5-6
Looking over the front of the car cylinders 1, 3, and 5 are on the head nearest the firewall, cylinder 1 is to the far left. Cylinders 2,4,and 6 are the ones you can see, with 2 being to your left.
Hope that helps.
When facing the engine the # 1,3 and 5 are at the firewall or back of the engine going from left to right and the # 2,4 and 6 are on the front going from left to right. the firing order is 1,2,3,4,5,6 going clockwise. when you are facing the engine from the front the # 1 plug wire is at the 11 o'clock position on the distributor cap
Depends on the engine. If it is the 2.8, then firing order is 1-2-3-4-5-6
All Chevrolet Celebrity cars are FWD (front wheel drive).
All Chevrolet Celebrity's use struts in the front. As information they use shocks in the rear suspension.
The water pump is on the front of the engine.
They have struts in the front and shocks in the rear.
I have an '88 Celebrity with a 2.8L engine. Standing in front of the car, facing the engine. Beginning with the back from left to right is 1 3 5. The front from left to right is 2 4 6.
The firing order for a 1996 Chevrolet S10 Blazer is 1, 6, 5, 4, 3, 2. The number one cylinder is on the front right as you face the engine.
front is 2 4 6 back is 1 3 5
On the l987 Chevrolet Celebrity with 2.8L V6 the vacuum line diagram is located on the front of the passenger side strut tower.
1996 Chevrolet Lumina is Front Wheel Drive, so should look a little something like this: Firewall/Windshield 1 - 3 - 5 2 - 4 - 6 Front Of Vehicle Firing Order is 1-2-3-4-5-6
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.