0
0010-0.014" and a normal business card serves as an easy to find gauge.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the gap setting between flywheel and coil on a small engine 3tpxs1481ba?
What I do at the shop is fold abusiness card in half . Put it in between the Coil and Flywheel. Bring the magnet around to Coil and tighten screws down. Perfect gap!
Point gap spacing for five HP Briggs and Stratton motor on the flywheel to coil?
I think what you are wanting is the air gap between the flywheel and the coil . The gap is somewhere around .002 in , but if you will take 2 matchbooks take off the covers and use them for spacers between the coil legs and the flywheel . Role the flywheel around till the magnet pulls the coil in . Place the matchbooks between the coil arms and the flywheel and tighten the screws . Check the spark plug and make sure you have good fire .
Coil gap 6.5 lawn boy mn10323?
Air gap between coil module and flywheel should be .010 inches.
What is gap between flywheel and coil on a Murray 17hp riding lawnmower?
You can use a standardbusiness card for the gap.
How do you sett gap between flywheel and coil?
The coil has two bolts to hold it in position. Loosen both bolts, place a .010 - .014 feeler gauge (or business card) between the coil and flywheel, and tighten bolts. The size of the gap determines the timing of the engine.
What is the gap between coil and flywheel on a Briggs and straton 4.5hp motor?
dollar bill
What is the gap between the coil and flywheel on a Yamaha G16 golf cart?
.012" to .020"
What is the coil gap for a Briggs and stratton 6hp motor?
20 thousandths of an inch will suffice. Fairly forgiving ..........loosen the coil and place a standard business card between flywheel and coil. Allow magnetic force from flywheel to pull together and sandwich card between flywheel and coil. Tighten coil. This will work fine.
The magneto air gap is a precision measurement thats taken between the?
The magneto air gap is a precision measurement that's taken between the edge of the flywheel and the ignition coil armature. The flywheel and the crankshaft are held together in alignment by the flywheel key.
How do you time a lawn mower engine?
On most lawn mowers there is no timing - they have the flywheel set, as long as the shear pin is in place, it will put the magnet by the coil at the proper time to fire. The points are run by the gap (you set the gap on the points) and the pin pushes the points open at the proper to fire. The only setting you have to do is the gap on the flywheel to the coil and the gap on the points.
How do you find the distance between the coil and the flywheel?
If you are talking about a small engine such as a lawn mower, the air gap between the coil and the flywheel is usually is .015 to .020 of an inch. A piece of cardboard from a cereal box can be used as a gauge if you don't have the proper gauges.
How do you adjust coil on 3.5 Briggs and stratton?
The coil is usually held on by two small bolts. Loosening the bolts will allow the coil to move closer or further from the flywheel. Use a feeler gauge to set the gap between the flywheel and the coil arms. Re-tighten the bolts when your done.
