eyelet
Hahahahahahaha, someone has no life. :) but yes, it is the front hole. the back is the anus.
The screw is to change between a luminous flame(orange) and non-luminous flame(blue). You should always screw the lock so that it covers the hole first.
I knew a watering hole called Brian. His brother was called Jim
black hole theory is called a statement
AnswerThe hole for a shoe lace is called a grommet.
The hole that you put a screw into is referred to as a "tapped hole". The rib-like things in the hole are called "threads" or, more specifically, "internal threads" as opposed to the external threads on a screw.
Screws are very much like nails, but are stronger. First a hole smaller than the size of the screw is drilled into the area that is to be screwed. Next the screw is inserted into the hole and turned to the right until it "bites" into the wood. It is then turned more until the head is flush with the board.
The screw socket into which an ordinary light bulb is inserted.
If the lid has a handle with exposed rivets, very carefully drill a tiny hole right through one rivet. That will break the vacuum that holds the lid to the stove. Later, a screw can be inserted into the drilled hole if necessary. Perhaps the hole will need to be made to a specific size to accomodate a small screw.
by makin a new hole
It is not a drill bit, it is called a Tap. You drill a hole slightly smaller than the Tap and then screw it into the hole.
If it is a screw, you drill a hole first then insert the screw using a screwdriver.
The screw head is larger to prevent the screw from pulling threw the hole made by the shaft
To clamp is just to hold two pieces of whatever together, usually with glue or an adhesive, but screwing, as the name suggests usually requires a screw... and you drill a pilot hole and then screw a metal screw into the hole.
there is a square piece of plastic under the bumpers. OPen it and you will see a hole for a screw. Get the tow screw (a screw with a cirlce loop) from the breakdown compartment in the trunk. Screw into the hole and let the tow truck attach a hook and yank you out.
screw
a bum hole is round depends what has been inserted into it, but normally it resembles a closed draw string : )