The load of a bridge is the amount of weight that can be distributed throughout the bridge without collapsing. Engineers take into effect, wind, rain, and earthquakes when calculating the load.
In engineering terms, dead load refers to the unchanging weight of a structure itself, plus any other load that may permanently be a part of the structure. On a bridge, for example, the main dead load would be the weight of bridge, and there would also be the weight of the abutments and perhaps a tollbooth.
Live load is a load on the object other than the load from itself.
no load voltage - full load voltage by full load voltage
there are two types mainly... off load and on load on load isolators are those which can break the circuit when the supply is still there. off load breakers cannont do that. the can only operate when there is no supply.
A bridge made out of balsa wood and is an often used educational project.
a live load bridge is a truck or a weight that after the bridge is made then you put the weight on the bridge and see if it holds!
What are the basis of a bridge load limit?
In bridge construction dead load, live load, and dynamic load must be considered. Dead load is the weight of the bridge itself. Live load is the moving weight on the bridge. Dynamic load comes from outside forces like wind and vibrations.
A dead load is the weight of the bridge or vehicle or building excluding the people or objects in it(An example is: If you were standing on a bridge all alone you would be the live load and the bridge itself would be the dead load)
A dead load is the weight of the bridge or vehicle or building excluding the people or objects in it(An example is: If you were standing on a bridge all alone you would be the live load and the bridge itself would be the dead load)
Dynamic Load The "load" is the total force and weight that a structure such as a bridge is designed to withstand. For a bridge, the total load includes the "dynamic" loads of traffic, people, wind, snow, and ice and the "static" load of the bridge's own weight.
A weight/load that does not move. For example, on a bridge, if there is a statue on the bridge, that would be considered a static load. A dynamic load is one that moves, such as cars passing over the bridge.
the load is compression and tension
The dead load is the weight of the bridge itself. The live load is things like traffic, wind, rain, etc. The dynamic load are things like earthquakes, big gusts of wind, and other things.
A truss bridge uses trusses as the load bearing element of the bridge. Using statics physics, a truss bridge applies Newtonian motion to ensure that the load bearing elements do not go out of a tension/compression equilibrium.
Arch bridge: the span beam of bridge is the shape of an arch & the load is diverted in compressive method. Beam bridge: the shape of beam span is of simply supported or continuous. here the load is diverted through bending compression method.
Trucks, etc.