I believe the lowset grit is 3, it looks like railroad rocks
Unfortunately no
Sandpaper currently is available in six different grit sizes. Every grit size is used for a different project. The sizes are 40-60, 80-120, 150-180, 220-240,280-320, and 360-600.
If there is enough layers of clear coat let you can watersand it with 2000 grit sand paper then buff it out with rubbing compound then with some glaze made by 3m.
from rubbing this sand paper we get more friction in magnesium
Garnet paper IS sandpaper -_-
40 Grit
Sand them with fine sand paper, 220 -280 grit/
sand the item with 200 grit sand paper all over,dip paper in water a little,then sand item with 400 grit paper dip paper in water a little,then rub steel wool fine grade steel wool all over item,then wipe off with a dry rag,all done.
To remove scratches u must use fine grit sand paper starting with 220 grit and progressing to super fine 600 grit sandpaper
Sand is much heavier than grit. Sand should be used if you're trying to weigh something down.
You may use a sander to smooth the surface of wood. You should sand against the grain of the wood, using. If you do not have an electric sander, you can use sand paper wrapped around a sanding block and do it by hand.
Grit can be defined as particles of sand or dirt that is loose. Grit can also mean the strength of one's character.
grit, sand, gum
I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to. I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to.
What kind of sander? what grit sand paper are you useing? do you have a dust collector? you need to have a lot more info to get a answer!!
Seven parts washed grit sand to one part cement. The grit gives it it's strength. If you use building/plastering sand it will crack.
Unfortunately no