0
What is the lowest priority interrupt in the 8085 microprocessor?
Wiki User
∙ 14y ago
The lowest priority interrupt in the 8085 microprocessor is INTR, unless you also consider the software interrupts, RST 0 through RST 7, which are even lower.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is a 8085 microprocessor?
with neat diagram explain the system bus structure of 8085
Describe RST 5.5 interrupts in 8085 microprocessor with examples?
RST 5.5 is level triggered interrupt & maskable also. it can be masked by using SIM intrruction. Vector address of the RST 5.5 interrupt is 002Ch
Where can you download book on microprocessor 8085?
mnsingh536@gmail.com
How many location can be accessed by 8085 microprocessor?
The 8085 microprocessor can access 65536 (2^16) locations in memory, and 256 (2^8) locations in I/O space.
Should any device be allowed to interrupt CPU while another interrupts are being serviced?
It is possible to allow nested interrupts. This is often done when there is a heirarchy of interrupts, some with higher priority than others. In order for this to work, the second interrupt must not be allowed to influence the progress of the first interrupt. We call this being "thread safe". In a nested scheme, an interrupt mask is set so that higher priority interrupts can be permitted, while blocking interrupts of the same or lower priority, and then interrupts are reenabled during the interrupt service routine. At the conclusion of the first routine, interrupts are disabled again, the mask is restored, and the normal interrupt return sequence is executed. In the 8085, this can be supported using the Read Interrupt Mask (RIM) and Set Interrupt Mask (SIM) instructions. While not strictly required, the logical priority is often INTR, RST5.5, RST6.6, RST7.5, and then TRAP, in order of increasing priority.
Which is the highest priority interrupt for 8051?
The highest priority interrupt in the 8085 is the TRAP interrupt.
Which are the highest priority interrupts?
when interrupts requests arrive from two or more devices simultaneously , the process has to decide which request should be serviced first and which one should delayed. the processor takes the decision with the help of interrupt priorities.
Why do you need 8085 maskable interrupts if they can be disabled?
if u want to execute high priority interrupt,at that time of low priority running.So, we can mask the low priority interrupt and execute the high priority interrupt.
Trap in micro processer?
It is an interrupt having highest priority in 8085
What is the use of RST?
RSTn(0-7) is software interrupt & RST(7.5,6.5,5.5) are INTEL's 8085 maskable interrupts their priority is respectively 7.5,6.5,5.5.RSTn.5 is hardware intterrupt and it is controlled by the external pin available on the chip of 8085. it is used to interrupt the microprocessor from its normal execution and tends to execute some ISR(interrupt service routine)
What peripheral has the highest interrupt?
The peripheral with the highest interrupt priority depends on the hardware and software design of the particular system. In the 8085, the TRAP interrupt has the highest priority. The peripheral connected to TRAP is your choice.
What is The highest priority interrupt in 8085 microprocessor?
In most of the Intel processors, the highest priority interrupt is the NMI line (called TRAP in the 8085). NMI means a non-maskable interrupt, and that means it cannot be delayed or ignored. The NMI line is usually used when there are problems such as non-recoverable errors, but it could be used for debugging or profiling.Most of the Intel CPUs have 2 interrupt lines, the NMI line and the standard interrupt line. The regular interrupt line is connected to one or more interrupt controllers which split that interrupt signal to different devices. The NMI line is for the most critical processes in the computer.
Why is trap nonmaskable in 8085 microprocessor?
The TRAP interrupt is nomaskable in the 8085 microprocessor because TRAP is intended to indicate some serious system problem, or a hardware assisted debugger single step facility.
What is rim in microprocessor 8085?
RIM is Read Interrupt Mask. It is used to access the interrupt mask register, which contains the status of the three interrupt masks and the serial input data pin.
What does 5.5 mean in RST 5.5 interrupt of 8085 microprocessor?
The 5.5 in RST 5.5 means that the interrupt vector is located between RST 5 and RST 6.
Why the name 8085 Why the name 8085 for microprocessor?
8085 is a microprocessor designed by Intel
What is an 8085 interrupt?
There are 2 types interrupts in 8085 such as: 1)hardware interrupt 2)software interrupt
