The oil capacity is probably around four to six quarts. If there is white residue inside the oil cap, then that means you either have a blown head gasket, or there is water getting into your engine block.
A ,38 Special CARTRIDGE will leave a fair bit of residue- due to the gap between the cylinder and barrel of a revolver (MOST .38 Specials are revolvers) The BULLET is the part of a cartridge that comes out of the barrel- they are solid metal, so do not create gunpowder residue.
Get honing stones and install on a drill. Use a lubricant such as WD-40 or Pb blaster to spray cylinder walls. Run honing stones up and down inside cylinder while operating drill. This will create a cross-hatched pattern on cylinder walls, just clean residue away and your done. Repeat for each cylinder.
That is the residue from the Big Bang.That is the residue from the Big Bang.That is the residue from the Big Bang.That is the residue from the Big Bang.
What is refinery residue
Salt (NaCl) is not a residue.
A residue is something left over. Fires usually leave a residue of ash.
Carbon residue is deposits of solid black residue from burnt carbon.
If the oil looks whitish, there is probably water in the oil, indicating a possible cylinder head gasket leak, but water could get in other ways.
The oily residue was sent to the lab for examination.Go and wash that residue off your hands.
This residue is bitumen.
Solid residue is what remains after a liquid evaporates.
Residue of The Residents was created in 1971.