Want this question answered?
39nm
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
The correct tightening torque for a 1990 Honda Accord oil drain plug is 29 foot pounds. This same torque applies to all Honda oil drain plugs.
Although the Owners Manual requires a specific torque for drain plug, it is not necesssary. Usually most technicans would recommend hand tightening it and a little quarter after that.-Richard, DDM Tuning for Mitsubishi Evolutions
your question makes no sense, clocking is the position of the plug, not related to the size of the plug or type of connector.
The torque for a 2003 Camry 2.4liter and most Camrys in that age range is 13 ft-lbs
According to the Autozone website : For a 1995 Ford Windstar , 3.8 L V6 engine : The spark plug tightening torque is ( 7 to 15 foot pounds )
type spark plug: DR8ES-L Electrode gap: 0.6-0.7mm (0.024-0.028in) Tightening torque: 20Nm (2.0m-kg, 14.5ft-lb)
I dont know the torque for the 2000 but a rule of thumb is, with ratchet get the plug snug and go a quarter turn. allways use anti-siez lube for plugs on your plugs.
The spark plug gap for the 1987 Chevrolet S10 4-wheel drive pickup with the 2.8 liter TBI 6-cylinder engine is .045 (in thousandths of an inch). The spark plug tightening torque is 7-15 foot pound.
A 2000 Jeep does not have a torque converter drain plug.
does a 1991 thunderbird torque converter have a drain plug