0
72 inches from tub floor.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Can shower head be installed above shower stall?
You can put it at any height. Unless there is some other reason not to, something structural, I always put them above the shower stall for taller people.
Can you view the height of shower head from fflr level?
view the shower head heigth from fflr. level
Height of shower fixtures?
The minimum standard is generally 72". Many people prefer to install them higher in order to accomodate taller people. I just measured our shower head height and it is 80". As with any project, be sure to consult your local building codes.
Is the shower head to be installed in the showerstall or above it in the wall?
above it in the wall
Just installed a new shower pressure balancing set and water leaks out the shower head when you turn the water on?
Yes and what is the question?
What is the standard height for a shower faucet valve?
According to the Architectural Graphic Standards The height is 42" from the shower floor. and the head should be between 65" and 78", I usually set this height at 74"
Which is a better estimate for the height of a shower head has?
6 foot 6 in. off foor.
How can you lower your shower head so that my wife can reach to adjust the spray as it is installed too high?
PVC pipe extension, that's what we did
How high should your shower head be?
1.90 meters is the standard, but from experience that will be quite low as some shower head droops down to -2" or -3" from the pipe. ideal is 2.10m to 2.40m Answer If you have an especially tall person in the house, you may want to adjust it to a higher height.
What is the standard height for a shower faucet?
1.90 meters is the standard, but from experience that will be quite low as some shower head droops down to -2" or -3" from the pipe. ideal is 2.10m to 2.40m Answer If you have an especially tall person in the house, you may want to adjust it to a higher height.
What is a ball connector on a shower head?
The ball connector is what the shower head rotates on to point the shower head in different directions
You have installed a mains fed electric shower with a rigid head. Do you need to fit a double check valve?
Yes, but only if you have a Rectal Thermatude Tramsmutor connected directly parallel to the shower, this will ensure that the oscillation period is reduced to 5 micro fliptons and at the same time will increase the static radial coupling on the thermal housing unit.
