Want this question answered?
you are suppose to replace head bolts they stretch and head will not torque right. When you buy the new gasket, order new bolts.
Yes there most defiantly is.
Head bolts should be tightened most of the way in a star-shaped pattern. Bolts should then be tightened completely following the same pattern as the first tightening.
Where can i order Head Bolts for a 1998 Mazda 626 2.0L? Try your local auto parts stores. If you strike out with them, try the Dealership.
you don't have to have the head checked but its recommended. the head bolts are supposed to be torqued in counterclockwise order from the inside bolts to the outside bolts. torque them in order in three stages to 18 ft/lbs then to 27 ft/lbs then an additional 120 degrees except the front right stud which you torque to 90 degrees
Hello: Install cylinder head bolts. Tighten cylinder head bolts according to following procedure: Tighten cylinder head bolts in order shown, Can not show diagram for this. Tightening torque : 36.1 lb-ft (49N
IN - 8-6-1-3-9 EX - 10-4-2-5-7 The external bolts are longer than the internal bolts. The head bolts are tightened in 2 progressive steps. Apply a light coat of engine oil on the threads and under the heads of the bolts. Torque bolts down (in numerical order) to 33ft-lb Then... Tighten bolts (in numerical order) an extra 90 degrees.
Consult your shop manual, there is a specific order that the head bolts must be torqued.
Varies by engine. We'd need to know the engine in order to answer this.
on a acura integra type r if you brake the head bolts what do you do on a acura integra type r if you brake the head bolts what do you do
You dont need to as long as bolts are tightened in the correct order and torqued to the correct fps.
Work inward in a circular motion.