Mazda 626
Chevy Blazer S-10

What Head bolts do you need to replace head gasket?


Top Answer
User Avatar
Wiki User
2013-09-09 01:08:47
2013-09-09 01:08:47

Where can i order Head Bolts for a 1998 Mazda 626 2.0L?

Try your local auto parts stores. If you strike out with them, try the Dealership.

User Avatar

Related Questions

you are suppose to replace head bolts they stretch and head will not torque right. When you buy the new gasket, order new bolts.

replace head, head gasket, and head bolts.

It is always a good idea to replace the head bolts with new ones and is cheap insurance.

No, simply check the bolt threads for an hour glass shape. If it has this THEN replace bolts

take off the head, replace gasket. reinstall head

no the head separates from block the valve cover comes off the head bolts are under that and take them out and pry head up and then replace head gasket then repeat the order put head back on and tighten bolts and be sure not to scratch the head gasket when you put the head back on

The head bolts to the block. The head gasket goes in between the head and block to seal the head to the block.

The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.

Remove head change gasket and replace head, pretty simple.

No you do not.... the valve cover only bolts to the head, and the head bolts to the block... True- these are two different jobs. When changing your valve cover gasket you may just want to ensure that your head bolts and lifters are still torqued down properly. Otherwise, DO NOT remove the head gasket if you simply want to change the valve cover gasket. when replacing the head gasket you should replace the valve cover gasket and may need to (depending on make & model) replace the egr gasket, intake mainifold gasket, and exhaust manifold gasket ...but not the other way around. If your replacing the head gasket ask your local auto shop if they carry a head gasket kit that includes everything necessary in one box...but if your just changing the valve cover gasket then just change that.

The head bolts will not have the same clamping capabilities, since they were stretched on the first installation. You may blow a head gasket due to the bolts losing torque.

you may want to tighten your head bolts, replace your head gasket. I would replace the gasket it and find out what the torqe specs are for the head

You do not repair a head gasket you replace it with a new gasket which requires removing the head.

The intake and exhaust manifolds, along with the timing belt will have to be removed to gain access to the head. Remove the head and replace the gasket. Torque the bolts down to the manufacturer specs and in the order Nissan suggests.

What is the cost to replace the head gasket on a Mazda MPV?

remove head and replace gasket :)

It is not possible to repair the actual head gasket. Repair of a blown head gasket is to replace the gasket.

Take the head off and replace. However make sure to use new head bolts when buying and replacing a head gasket and find some litterature on the correct lbs of torch and sequence for your head bolts. You will also need a torch wrench for proper torch. Your part provider should be able to sell you the correct head bolts for your application

I know for a 93 BMW 325is 2.5L DOHC 6chy. You might as well just go a head and buy the head gasket set it runs about 200$ at autozone. It comes with valve cover gasket, valve stem seals, and head gasket. But its also recommended to replace the cylinder head bolts also.

The only repair for a blown head gasket is to replace the gasket.

Remove the cylinder head and replace the gasket. -Possibly even have the head skimmed.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.