answersLogoWhite

0


Best Answer

Automobile water pumps are usually bolted to the engine block. ---- some cars have the pump bolted to the timing cover, Eg. Ford 302

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the part called that the water pump bolt to called?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the Water pump bolt torque on Chevy Trailblazer?

The torque of a water pump bolt can be requested from the manufacturer. The Chevy Trailblazer has a high torque for the water pump bolt.


What is the part called that the water pump is connected to on a 1996 mercury grand marquis?

what is the part called where the water pump is connected to on a 1996 mercury grand marquis -------------------------- That would be the engine


How do you get to the last 13mm bolt on a water pump without removing the whole power steering pump on a 3.8l 98 Buick Regal?

Remove the power steering pump. I just did a water pump. If you remove the top PS pump bolt and loosten the lower PS pump bolt about 1/2 way you can push the pump over with one hand while removing the water pump bolt.


What size of bolt goes in the water pump of a 83 yz80?

which bolt


How do you replace a water pump where you broke a bolt I cant get the broken bolt out. Can I replace the water pump with 4 bolts instead of 5.?

After removing the pump, if part of the bolt is sticking out, you may be able to grab it with vice grip pliers. Using a penetrating oil is also a good idea. If you cant grab the bolt, you may try a device called an e-z out. You will have to drill a hole in the bolt of the proper size then insert the e-z out in the hole and turn it with a wrench to remove the bolt. as a last resort the bolt can be drilled out then new threads inserted in the engine by a device known as a helicoil. This may have to be done at a garage by a mechanic.


How do you replace the water pump on a 1998 GMC Sonoma sls?

the water pump on the 4.3L vortec is easy. there are four bolt holding the water pump in place. these bolt hold your fan clutch also. the water pump and fan system.are built as one. remove these bolts and you are ready to change your water pump.


How do you replace the water pump in a 2002 3.8L Impala The water pump is stuck with all the bolts out how do i get the water pump off?

The steering pump is attached with 2 bolts. If you take the top bolt out and loosen the bottom bolt until it's almost completely out, you can move the pump/pulley enough to snake that bottom left water pump bolt out.


How do you remove a broken bolt of the inside of a water pump in a Chevi lumina 93?

get a easy out from the part store.. you will also need a GOOD drill


Is water pump a 3 bolt or 6 bolt for a 1997 intrepid?

It could be either, by far most are 3 bolt.


What is the bolt pattern for the water pump on a 1999 to 2001 dodge ram 1500?

The 1999 to 2001 Dodge ram 1500 pickup truck water pump bolt pattern consists of two bolts on each side of the water pump. A picture of the bolt pattern can be obtained from most auto-parts stores.


What do you ask for if the plastic part is broken that goes into the block that the hose from the water pump connects to on a 1991 Pontiac Bonneville?

The part you want is called the water outlet.


What is the secret to replacing the water pump on a 1994 Buick Park Ave ultra the lower left bolt of the water pump is not accessible?

On my 91 you HAVE to remove the engine mount that covers the water pump.