stone deflector/Splash guard. Just keeps things out of the engine bay
It is just clipped in. Just pull up - it will snapp off.
Steel on the inside, a plastic cover on the outside.
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
Remove the plastic cover to screw in the lashing eye if the vehicle is being carried on a transporter. The lashing eye is normally stored clipped on to the side jack in the spare wheel well.
no se como cambiarlo
Not Necessary but helps a lot: Jack the front of the car up on both sides and remove the front wheels. Remove the bolts that hold the plastic fender well up. If you look at the seam where the front bumper cover meets the right front corner panel (one's metal and one's plastic) there are more bolts to remove. Pop the hood, and remove the push locks that hold the plastic bumper to the metal frame in front of the engine on top of the radiator. The front bumper cover should fall off (if you don't want it scratched lay a towel down in front to lay the bumper on. From there, remove the two bolts that hold the front Chevy symbol to the bumper cover. and pop it off.
It has plastic clips.
Clipped to the firewall, passenger compartment, just above where the passenger's feet would be. Remove the plastic cover (I think 7mm bolts) and you'll see the bottom of it.
You have to take out the bumper. Just take out the screws that are in the fender, take out the plastic cover that it is under the car that is attached to the bumper, take out the clips of the plastic grille with the Honda logo and pull the bumper. Don't apply to much force. When the bumper is out you will see the other bolts to remove the headlight.
There are two ten mm bolts on top in the plastic header panel which must be removed. There are two more under the bumper cover. You must remove the bumper cover to access them.
It is in the rear, right under the rear bumper. There is probably a plastic cover surrounding it.
There are two ten mm bolts on top in the plastic header panel which must be removed. There are two more under the bumper cover. You must remove the bumper cover to access them.