answersLogoWhite

0


Best Answer

I = 2A R = 1000Ω Power Dissipated P = I2R = (2A)2(1000Ω) = 4000W Voltage across resistor V = IR = (2A)(1000Ω) = 2000V

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the power dissipated by a resistor with a current of 2 amps and a resistance of 1000 ohms?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the power dissipated by a resistor with a current of 0.02 A adn a resistance of 1000 ohms?

Power dissipated = I2R 0.022 x 1000 = 0.4 watts


2 resistors unequal value are in parallel. Would the power dissipated by the resistor with larger ohmic value be greater than the power dissipated by the resistor of lesser value?

No, because the power dissipated in a resistor is proportional to the square of the current through the resistor but only directly proportional to the resistance of the resistor (I^2 * R) and the current through the lower value resistor will be higher than the current through the higher value resistor, the lower value resistor will usually dissipate more power.


How Determine the power dissipated by the resistor?

Power dissipated by the resistor = I^2 * R or V^2 / R, where R = its resistance value, I = the current in the resistor, and V = the voltage drop across the two terminals of the resistor. You need to measure or find the information of either I (using an ammeter) or V (a voltmeter).


What is the power dissipated by a resistor with a current of 0.02 A and a resistance of 1000 ohms?

Power = I2 R = (0.02)2 x (1,000) = 0.4 watt


What is the power dissipated a resistor with a current of 0.02 amps and a resistance of 1000 ohms?

P = I^2 x R] P = 0.2^2 x 100 P = 4 W


How do you calculate power loss from a resistor?

The power dissipated across a resistor, or any device for that matter, is watts, or voltage times current. If you don't know one of voltage or current, you can calculate it from Ohm's law: voltage equals resistance times current. So; if you know voltage and current, power is voltage times current; if you know voltage and resistance, watts is voltage squared divided by resistance; and if you know current and resistance, watts is current squared times resistance.


At what level will typical resistors burn out?

A typical resistor will burn out when it dissipates power in excess of double its power dissipation rating for an extended period of time. The power dissipated by a resistor is equal to I2R or E2/R, where E = the voltage across the resistor I = the current through the resistor R = the resistance of the resistor


What is the formula of power being dissipated in a resistor?

Voltage times current. You obtain current from the division of voltage and resistance, so: I[A] = U[V] / R[ohm] and P[W] = U[V] * I[A] it follows, that P[W] = U[V] * (U[V] / R[ohm]) = U[V] ^ 2 * R[ohm] So, voltage squared divided by resistance will give you the power that will be dissipated in a resistor. Whether the resistor will take that abuse is up to its power dissipation rating, however.


Why does the heating effect of an electric current depends on the electrical resistance of a conductor?

The power dissipated by a resistance 'R' carrying a current 'I' is [ I2R ]. The power is dissipated as heat, and you can see from [ I2R ] that for a given current, it's directly proportional to 'R'.


How are power dissipated in a load or in a resistor?

Due to energy usage and/or the reduction in conductance (increase in resistance) in a given load or resistor, some electrical energy is lost through that component. As such, a proportional drop in current and voltage occurs.


What is the current running through a resistor of 9 ohms with volts of 90?

I = E / RIf the voltage across the resistor is 90 volts, and the resistance of the resistoris 9 ohms, then the current through the resistor is90/9 = 10 Amperes.Don't try this at home!The power dissipated by the resistor is E2/R = (90)2/9 = 900 watts. That's comparable to the power (heat) dissipated by a small toaster. A common composition resistor will get hot and possibly explode if it's asked to dissipate that kind of power.


What power is dissipated by an 8.2 k resistor if a current of 0.005 amps pass's through the resistor?

.205 watts or 205 mw