In may area around $150.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
AS A GENERAL RULE YOU GET THE ROTORS CUT OR RESURFACED BY A REPUTABLE SHOP. THERE IS NOT REPAIR THEY ARE EITHER THICK ENOUGH TO CUT OR THEY NEED TO BE REPLACED
where do I add brake fluid to my Honda accord 92
Most Honda brake rotors require a large slide hammer as they are not only pressed onto the hub, but also rusted which makes it very hard to remove. This may well require an experienced technician.
who supplies the 2013 accord brakes to honda
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.
the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.
AnswerMy car had a problem like that also, I changed the front brake rotors and the problem went away. If replacing the brake pads and rotors does not solve the problem, you may have an issue with one or both of your calipers. Often calipers can sieze partially or completely. This will make the brake distribution uneven between the front wheels and can lead to shaking or pulsing when applying the brakes.
How do you change rear brake pads on a 2006 honda accord ex?
how much does it cost to replace brakes rotors on honda crv