Generally you start at the wheel farthest from the master cylinder and work your way closer, like right rear, left rear, right front, left front. However, I have seen certain cars that require a different proceedure, yours may be one of them Also, if your car has anti-lock brakes it can get more complicated. In any case, I usually ask somebody to sit in the drivers seat and pump the brake pedal a couple times and then hold it down with slight pressure while I open the bleeder and close it. 3 or 4 times for each wheel, or until all the air bubbles are gone. Please check for the manufacturers recommended procedures buy purchasing a repair or service manual.
my Acura legend brakes are fine and Thank you the problem is my interior inside my car looks like dirty and i need to clean it so it will look brand new... I love my 1992 Acura Legend.
same as the front brakes they r both disc brakes
How do you bleed the cooling system of a 1988 acura legend? Is there a bleeding screw and where is it located?
either you don't have enough fluid in the reservoir or you need brakes
check your fluid levels, some vehicles will need brake bleeding but some may have brake sensors which that light that is lit up on your dash is for when the brakes were replaced the sensor may not be installed correctly go back and replace the sensor
check the brakes usually click when pads get thin
Right rear, then left rear, then right front, and ending at the left front.
Acura Legend was created in 1986.
Why 1988 acura legend downshifts
How do you change transmission in a acura legend?
I have an 95 Legend and when I step on the brakes I cant shift from park. Also I have no brake lights in the back as well. I checked all the fuses and they are goood. What to do?
Were are the timing marks on a 1991 acura legend