answersLogoWhite
Pontiac Grand Am
Pontiac Grand Prix
Grand Am SE

What is the proper location for a threaded block heater on a 2.3L Pontiac Grand Am?

262728

Top Answer
User Avatar
Wiki User
2008-02-03 04:16:51
2008-02-03 04:16:51

It goes into the water pump. You remove a plug and screw in the block heater. Between the engine and the firewall. You can get at it from underneath.

1

Related Questions

User Avatar

This is a big job get a manual on your car from the parts store and it will give you tHe propeR steps to change it.

User Avatar

Pretty much behind the radio, but all the way to the firewall. Impossible to replace the heater core without destroying something without a proper instructional.

User Avatar

The proper tire size for a 1998 Pontiac Transport is P205/70R15. This info is on a sticker placed on the driver's door jam.

User Avatar

you have to remove the pressed in studs ,and tap the hole with the proper thread size for the threaded stud. this may require drilling the heads with the proper size drill, for the tap size you need. you must make sure that the new threaded studs are bigger than the pressed in ones, or you won't be able to thread the stud holes.

User Avatar

The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

User Avatar

It's buried underneath the dash, and, the question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

User Avatar

1949 Pontiac Chieftain Eight Series 27 tire size is 7.1 x 15".

User Avatar

lack of proper care. lack of proper (distilled) water in the radiator.

User Avatar

The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

User Avatar

The question you ask is too involved for a proper answer. You may want to go to a car parts store, or book store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

User Avatar

Remington Model 12 barrels are threaded to the action. Barrels can be replaced with the proper equipment.

User Avatar

Yes...you can put just about any engine in anything with the proper skills, time and money. If the Cutlass you have has an Olds engine in it now then the transmission will bolt right up to the Pontiac engine. If it's a Chevy engine you'll need a B.O.P. transmission. You will need to change the motor mount location. Depending on the year of the Cutlass it may actually have the bolt holes drilled in the frame for the Pontiac engine mounts. For reference, find an older Grand Prix with a Pontiac 301 engine. This will have the correct mounts and location. You will also have to change the exhaust head pipe locations.

User Avatar

What is the proper way to address a meeting location in the Board Room of a building

User Avatar

harmonic balancer has threaded holes for attaching the proper puller.remove big nut from shaft then use whell puller

User Avatar

as safe as the design of the heater, and the care of the operator. poor contruction is unsafe; good construction is safe. Proper maintenance is essential, as well as proper storage of fuel and keeping flammable items away from the heater.

User Avatar

The water heater will work if it will fit dimensionally. The proper electrical voltage and amperage are necessary if it is electric . Propane or natural gas will also work with the proper supply lines .

User Avatar

To build a proper rat wall, one must obtain to proper tools, the proper supplies, the proper parts, and the proper instructions for building it in the location they would like it to be.

User Avatar

low coolant? Bad thermostat? Climate control not sensing proper temperature? Heater core plugged or restricted? Heater core airbound?

User Avatar

Clevis hangers attached to threaded rod with a rod coupling to give the proper amount of pitch

User Avatar

The proper noun Vertentes is a location in Brazil.

User Avatar

You need to start out by checking the a/c-heater controller and the a/c-heater doors behind the dash for proper operation..............

User Avatar

If the engine is at the proper temperature and the coolant is full, you have a restricted heater core.

User Avatar

there a switch on your heater control panel.be more specific to get a proper answer


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.