Monitor cables are used to connect Computer Monitors to the PC tower. Without monitor cables, you would not be able to see anything on your screen from the PC.
It is normally used to supply power to the monitor, which contains the screen. A monitor runs on the normal supply voltage for low-power devices, 120 v in the USA and 230 v in Europe.
Trade the cord of the PC video port, move the video card to a new slot, and trade the video card.I hope it will be the right answer!ty denatra it was bery helpful and im going to give some hints too hope this helpsi believe you should ask yourself these questions:1. is the monitor electrical caple plugged in?2. is the monitor turned on? try pushing the power button on the front of the monitor it should turn yelow or green, indicating the monitor has power.3.is the monitor cable plugged into the video port at the back of the PC and the connector on the rear of the monitor?4.try a different monitor and a different monitor cable that you know are working5. turn the monitor 180 degrees.UndeadSoulz
Go to google shopping type CRT monitor power cable find the one that is compatible to your PC.i checked and you wont waste no more than 20 dollars.
Make sure the monitor eletrical cable is plugged in. Make sure the monitor is turned on. Make sure the monitor cable is plugged into the video port at the back of the PC and the connector on the rear of the monitor.
Power cable is a thick cable connecting your computer to an electrical wall outlet. It can also be a thin wire connecting your modem or other device to a rectangular [ usually ] power supply to your electrical power bar or wall outlet. Data cables are much thinner, used mainly internally, and can be many wires attached together horizontally to form a wide ribbon of wires. However, a data cable can also be a much thicker cable connecting your modem, router, printer etc. to your computer.
if it has a separate cable both ends of the cable are male and in the back of the computer and the back of the monitor is female
Difference_between_copper_and_bronze
A computer monitor splitter cable is used to send video signal from one monitor to a second monitor. This may be helpful when making presentations to meetings or for demonstrations in classrooms.
There will be no effect on the computer speed if a CRT monitor's power cable is directly connected to the CPU. Though the PSU, or, the power supply unit must be upgraded to a 500 W one .
I am wondering the same thing, if you are talking about the 8pin mini din cable that splits into video input and power. If you found anything let me know...
A monitor, a cable, huge computing power and service capabilities
The sockets on the back on the monitor should help you decide which cable you will need for your monitor.
it is used to attach the pieces of computer euipments like keyboard monitor
If a monitor says auto processing, it means there are driver problems. To deal with this, simply remove the power cable from the monitor. Wait for a minute and plug it back in and turn on the monitor.
Replacing a computer monitor should take less than 10 minutes. First shut off the computer. Unscrew and unplug the (blue or white) video cable for the monitor from the back of the computer, and unplug the monitor power cable. Then remove the old monitor from the desk, replace with the new monitor, and plug it into the video and power plugs. Start your computer and once it has started, adjust the resolution and refresh rate to match the specifications for your monitor.
Cable cams are used in order to monitor cable lines. Cable cams are important and are key to monitoring any problems that cable cars may encounter during one's journey.
Two - the power lead and the data cable that connects to your computer
Video cables: HDMI, DVI-D, VGA. Power cable.