0
Any belt in a car assists in moving all parts within the engine to work in providing power and cooling to vehicle. The alternator provides power to the battery and the fan cools the radiator so the engine will not overheat.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you adjust fan belt on 1996 300D?
how do I loosen fan belt to remaove alternator for replacement of alternator?
How many fan belts are in a 1987 Jeep Grand Wagoneer Fan Power steering Alternator?
you should have three belts total. Going from the fan towards the distributer the first belt should be the power steering, then the actual fan belt, then the third belt is the alternator / a/c belt, i hope this is helpful for you! So for the answer to your question, there is one fan belt, the second belt in from the fan!
How do you replace fan belt on ford power stroke PICKUP 2004?
your fan belt may be connected to your alternator if so loosen alternator romove belt put new one on and pull alternator back until proper tension is aqquired tighten
Why would your fan belt and alternator belt stop turning and the engine still running?
your water pump and or alternator is frozen ( broken )
Is the alternator belt separate to the fan beltI thought they were both on the same belt?
no
How do you fit fan belt on Mercedes vito?
The fan belt is fit onto a Mercedes Vito by loosening the alternator bracket and allowing it to move downward. The belt can then be slipped over the remaining pulleys and then back over the alternator.
How to put on fan belt on 1993 Chevrolet pickup 305?
You have to take off the alternator to be able to reach the fan . After you should oiul the belt to slip on the fan very easy . Put the alternator back on and your ready to go .
What is the purpose of a serpentine belt on a vehicle?
The serentine belt keeps your cooling fan turning and also helps the alternator which keeps your battery charged. The belt runs everything, power steering pump, water pump alternator as mentioned above as well as the air conditioning compressor and smog pump.
What sends power to the alternator?
The only power sent TO the alternator is rotational motion, usually from the fan belt.
Why does car engine squeal when turn on the ignition?
Most likely it is a loose fan belt (commonly used on older vehicles, prior to the newer serpentine style belt). The fan belt can be tightened by loosening the alternator mounting bolts and adjusting the alternator tension on the belt.
How do you replace a fan belt for 86 Chevy Monte Carlo?
Loosen the alternator and push the alternator down and pull the belt off, put new belt over crank and water pump pulleys and around alternator pulley and pull up on the alternator to where the belt is tight and tighten the alternator bolts down.
Does a 1988 Pontiac fiero have a fan belt?
nope, not for a fan anyways, for alternator, water pump ect it does
