To check the rear axle ratio on your Suburban, you need to safely jack up the vehicle to get access to the the rear axle. Then there should be a metal tag on one of the bolts on the rear axle cover indicating the axle ratio. The ratio varies with different options and load capacities, so it's not the same for all Suburban's.
3.08
abs sensors are at the axle hub
depends on the options chosen at purchase, call g.m with axle number
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
That is done through the dealers computer system. There isn't one specific digit in the vin for the axle ratio.
Like 3 .42
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
Count the ring gear teeth and the pinion gear teeth and divide the ring gear # into the pinion gear # and that will be the gear ratio. Are you can write the VIN# down and call a Chevy dealer and ask for parts. Then tell the parts man that you have the VIN# and you would like to know the gear ratio in your truck. He'll tell you.
The Chevrolet suburban 1500 axle is interchangeable with the Chevrolet Silverado 1500 axle. The manufacture year of the vehicles should be the same.
After removing axle from steering knuckle you can pop it out of tranny with a pry bar.
largely depends on axle ratio
bad therm actutor in 4wd front axle