Want this question answered?
It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.
well if you have a 8 tooth rear driver you will need a 23t sprocket, if u have a 9 tooth rear driver you will need a 25t sprocket, if u have a 10 tooth rear driver you will need a 28t sprocket, and if you have a 11 tooth rear driver you will need a 30t sprocket
Rear: 60Nm Front: 145Nm Please see the related link below for more information.
depends if the sprocket is bigger or smaller than a stock sprocket.
The chain is size 530, and the stock gearing is 15/45, meaning that the front sprocket has 15 teeth and the rear sprocket has 45 teeth.
They came stock with a 49T or 48T rear sprocket you can choose a replacement with either a 48T, 49T, 50T, or 51T, if you have the old sprocket count the teeth on the sprocket and that tells if it is a 48T, 49T or whatever (48T = 48 teeth)
It uses a 47 tooth sprocket.
A bigger front sprocket gives a higher top speed. A bigger rear sprocket gives a lower top speed. A bigger front sprocket is less torque more top speed, and a bigger rear sprocket is more torque less top speed.
first. take the left side rear wheel off. then remove the 4 bolts that hold the sprocket to the sprocket holder. then remove sprocket
engine sprocket =14t rear sprocket =35t
The best rear sprocket for your Skyteam ST50 PBR Monkey Bike would be the 32 Tooth Rear Sprocket for PBR 50cc ~ 125cc monkey bikes. If you shop around you can get one for a good price online.
On a bike there's one(or more) front sprocket(s) by the pedals connected by a chain to one(or more) rear sprocket(s) by the rear wheel. As the wheel isn't driven directly by the pedals, and there's usually a difference in size between the front & rear sprocket this constitutes a gear.