Want this question answered?
The total resistance of a circuit is the sum of the supply's internal resistance and its load resistance, because they are in series with each other. This is true regardless of the magnitude of, or the variation in, the current.
No. Load resistance is the value of the element actually doing the work of the circuit it is connected to. A speaker connected to an amplifier is the load.
A: That will happen anytime the voltage source is not able to provide the power needed for the load. If the load exceed the power available from the source the voltage will be reduced as IR drop from the source
Combines bandwidth and balances network traffic
On Circuit Resistance = Close to the total load Resistance. Off Circuit Resistance = Near Infinitive High Resistance.
The total resistance of a circuit is the sum of the supply's internal resistance and its load resistance, because they are in series with each other. This is true regardless of the magnitude of, or the variation in, the current.
There is a relation between transmission media and bandwidth. The transmission media cannot exceed the amount of bandwidth available. The transmission of media is limited to the bandwidth.
Load current is related to load resistance by an inverse relationship. The load current increases linearly as load resistance decreases. Remember, the less resistance, the more current.
Bn>B3bn
No. Load resistance is the value of the element actually doing the work of the circuit it is connected to. A speaker connected to an amplifier is the load.
A: That will happen anytime the voltage source is not able to provide the power needed for the load. If the load exceed the power available from the source the voltage will be reduced as IR drop from the source
when source resistance and load resistance are equal maximum power is transfered
The product of bandwidth and gain is constant. If bandwidth increases then gain decreases and vice versa.
The resistance arm is the side of the lever (from the fulcrum to the load) that carries the load.
when numerical aperture increases ,there will be greater lss and low bandwidth...jahi
Combines bandwidth and balances network traffic
Depending on who is asking about, it could be. But strictly speaking, no. When referring to "load", this could be resistance and reactance (Load at a certain power factor).