No. Load resistance is the value of the element actually doing the work of the circuit it is connected to. A speaker connected to an amplifier is the load.
A: That will happen anytime the voltage source is not able to provide the power needed for the load. If the load exceed the power available from the source the voltage will be reduced as IR drop from the source
The total resistance of a circuit is the sum of the supply's internal resistance and its load resistance, because they are in series with each other. This is true regardless of the magnitude of, or the variation in, the current.
On Circuit Resistance = Close to the total load Resistance. Off Circuit Resistance = Near Infinitive High Resistance.
Real-world batteries do not have zero internal resistance. When one connects a load (resistance) to a battery, current begins to flow and the open-circuit potential is divided between the battery's internal resistance and the resistance of the load. Thus, one will measure a lower voltage at the battery terminals when a load is connected, compared to no-load conditions.
When the value of the load resistance in a transformer is changed, it will affect the current flowing through the circuit. Increasing the load resistance will decrease the current, while decreasing the load resistance will increase the current. This change in current will in turn affect the voltage across the load and the efficiency of the transformer.
Load current is related to load resistance by an inverse relationship. The load current increases linearly as load resistance decreases. Remember, the less resistance, the more current.
when source resistance and load resistance are equal maximum power is transfered
The resistance arm is the side of the lever (from the fulcrum to the load) that carries the load.
Depending on who is asking about, it could be. But strictly speaking, no. When referring to "load", this could be resistance and reactance (Load at a certain power factor).
Because by increasing the load resistance, the total circuit resistance is reduced. This means with less resistance, there is more current drawn from the source. Doubling the size of a load resistor increases the load current.
A: That will happen anytime the voltage source is not able to provide the power needed for the load. If the load exceed the power available from the source the voltage will be reduced as IR drop from the source
specification of inductive load,capactive load,resistive load in laboratory
The total resistance of a circuit is the sum of the supply's internal resistance and its load resistance, because they are in series with each other. This is true regardless of the magnitude of, or the variation in, the current.
explain why all the load must be removed when to conduct the insulation and resistance testing
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
50
It is load resistance RL. It can be any device that can act as a load at the output end. Example : A resistor