Want this question answered?
There is no torque sequence just torque rocker arm studs to the proper torque
heat fatigue.
40ft/lbs
If White smoke with oil come out from DDC running Engine Breather out let, it symptoms of Piston Ring set wear out and injector has to be calibrated,
The torque specifications fourth the rocker arms, on your C 15 Caterpillar diesel engine, is 14 pounds per square inch. The rocker arm should be torqued at seven pound intervals.
17 pounds
It is between the valve top and rocker For 4ba1 it is 0.40mm
a rocker arm is the arm that sits on top of the valve stem and connects to the push rods 'the push rods sit on the cam so when engine is running, the push rods go up and down in a timed sequence and with the rocker arms, open and close the inlet and exhaust valves. the rocker arm is located inside the valve(rocker)cover One component was left out. The push rod sits in the valve lifter that rides against the camshaft
The rocker torque sequence is 10 6 3 9 15 11 4 1 7 13 16 12 5 2 8 14 THE TORQUE IS 16FT/LB BUT ONLY 9FT/LB FOR THE LITTLE ONES AT THE DISTRIBUTOR
Destroys push rods, valves, rocker arms, and pistons if valves drop into cylinders, DO NOT EVER use ether!
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.