Ford Crown Victoria
Serpentine Belts

What is the serpentine belt routing for a 2001 Ford Crown Victoria if the sticker under the hood is missing?


Top Answer
User Avatar
Wiki User
2015-07-15 15:35:09
2015-07-15 15:35:09

Your local parts store should have a belt routing diagram in their serpentine belt catalog. I know for a fact that NAPA and Carquest can provide you with this.

The online AutoZone diagram was wrong. Take a photo of it.

Make sure the new belt is the same size.

Got a 2001 Crown Vic, Police Interceptor, was replacing the serpentine belt, got called away after taking it off, forgot how it went back.

To no avail the internet was useless, wrong pic; but others had the same question. Remembered I had taken a lot of photos when I replaced intake, and there was the magic photo that saved my day. others!

Put up a photo on my site:

User Avatar

Related Questions

There should be a sticker on the fan shroud or on the bottom side of the hood. If your sticker is missing, that is the same truck I drive. I could post the routing sticker somehow.

There should be a sticker under the hood with the proper routing. If it is missing, your local dealer should be able to print out a copy of the routing.

Check under the hood for a black and white sticker. Should be labelled serpentine belt routing.

look at the drivers side of the radiator the should be a white sticker that has a picture of the routing

When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.


You should have a belt routing diagram sticker on top of the radiator shroud. I've also included a video that shows right where this sticker is and how to replace the serpentine belt on your truck.

Open the hood and there will be a sticker by the radiator (right above the grill) showing belt routing.

There should be a sticker under the hood right around the lever to open it, the sticker shows you the correct way.

Either in the owners manuel or on a sticker under the hood of the car.

In the engine compartment, somewhere in front of the top of the radiator, there should be a diagram sticker showing how to run the serpentine belt

Unless the hood has been replaced there should be a sticker label on the underside of the hood showing the belt routing.

any auto parts store will print it out for you My truck has a sticker on the radiator shroud with the a picture of the belt diagram. If the sticker is missing go to your public library and look at one of the Chilton manuals for your year and model. Also, it makes a difference if you have air conditioning or not (different belt routing).

There is a sticker on the radiater support(rad yoke) that gives basic engine info, and the routing of the belt.

There should be a sticker on the underside of your hood that shows the routing i'm pretty sure that the diagram should be located on the car. under the hood, on the radiator cover (black plastic cover at the front undere the car between headlights) if not, then i think you're missing a sticker... also check your manual. Auto Zone can print a diagram.

It's on a sticker where the shock absorber is. If it's missing, a GM dealer's service center will have it.

It should be on a sticker on the radiator fan shroud. If it's worn away, look at a friends, or in the junk yard.

Open the hood and look around the hood latch mechanism on the metal frame in behind the radiator. You'll see a sticker with the belt routing on it. If you get stuck, remember that the back of the belt goes on smooth pulleys and the inside of the belt goes on the grooved pulleys.

I found the serpentine routing chart for my 87 Lincoln lsc in a Mitchell's auto repair book at the local public library. There are diagrams for many autos. You can xerox the book and take home a hard copy for $0.15

my stickedex was missing buizel sticker

there is a sticker under your hood with a detailed description of the routing. try there

under neath the hood there should be a diagram sticker showing the routing of the belt , if not i usually go to the library and look at the chilton manuals.

Look for sticker on shroud of radiator or under hood, it will show routing of serpentine belt. If the sticker is missing, click on the link below to purchase. Once at the site, select your year & make from the drop-down box in the Body Parts Catalog. This will take you to another page where you will select your model from the drop-down box. This will take you to another page, and on the left hand side select Information Labels. The routing may also be in a Haynes or Chilton manual, but I'm not positive. You may also want to look in your owners manual. Good Luck!

easylook under the hood there is a sticker that shows you how Easy IF the sticker is there

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.