21 port - FTP (File Transfer Protocol)
25 port - SMTP (Simple Mail Transfer Protocol)
110 port - POP3 (Post Office Protocol used by email clients)
80 port - HTTP (World wide web Portocol)
Services: port 21- FTP, port 25- Secure shell, Port 80- Web Server and port 110-Web Server
Protocol: port 21-FTP, port 25- SSH, port 80- HTTP and port 110- POP2
80: HTTP 20,21 : FTTP 67,68: DHCP 23: TELNET 53: DNS 69: TFTP 110: POP3 25: SMTP 143: IMAP 119: NNTP 161,162: SNMP libin Tom KK Systems Admin. Orange County Coorg
this port are server port for transfering data & mail & ftp ...
port 21 FTP port 25 E-mail SMTP port 80 web server HTTP port 110 E-mail POP3
SMTP uses port number 465 by default. It stands for Simple Mail Transfer Protocol. It is the protocol for sending emails in a network.
There are only two ports available which are made by expander hardware. These ports include the following products: a port expander and a port replicator.
You cannot ping specific ports as they are not designed to respond to this type of protocol. Each port can be checked for an open or close state.
Port Number
Athens have the following ports: Main port : Pireas Other port : Rafina Industrial and military port : Elefsina Many fishing ports like : Alimos, Varkiza, Lavrio...etc
An address does not define a port. Many kinds of communication could be directed to/from that address that would communicate on different ports. If you are asking about the port for HTTP protocol, it is port 80.
A designated port is the ports that goes from the root bridge switch to the edge of the network, so there is always a path from the root bridge to the other end. In contrast to root ports, which goes to the root bridge, instead of away from it. All ports that isn't root ports or designated ports are blocked.
Different ports are used for each different protocol used by Instant Messaging. Some common protocols are Windows IM clients Port 1863 AOL Instant Messaging Port 5190 Jabber / XMPP Port 5222/5269 (or secure 5223)
Ports on Cisco routers can be enabled or disabled by the router OS. "Administratively Up" simply means that the port has been enabled by the router's OS. If a port is enabled (Administratively Up) and the protocol is down, then there is a problem with communications over that port. Problems could one of many including; bad cable on the port, the far end device is down, the protocol configurations on the two connected device ports are not configured correctly to enable communications.
parallel and serial port
A person can open internet ports by first accessing the firewall setting in the control panel. The advanced tab allows for ports to be opened based on the protocol being used or the specific port number.