Should be a 7mm
Pump the pedal to the floor and then screw on the cylinder.
Yes, there is a bolt and a plate that holds the distributor down.
You either, simply unscrew it or there is a screw that you take out. More than likely a hex screw.
there isnt one after 1996
Take the old spark plugs out and screw the new ones in
on the side of the gearbox, there is a levelling screw, that determines the amount of oil
Where the cable hooks on to the transmission there should be a little screw what adjusts the cable.
Buy the bracket from Honda with the hardware. in the front grill you will see two screw holes. Just line it up with the bracket and screw it on.. That simple
Is there a screw holding it on? Look for a black plastic cover over the coil restricting your access to the base of the rotor. You may need to remove this cover. You might also need to crank the engine to a different position fo access the screw if it has one. If there is no such screw, just pull the thing off.
The rear bumper on a Honda Civic is held on using several mounting screws. After remove each screw the bumper will be held on with mounting clips. The bumper can be gently pulled off.
Its on passenger side near the firewall its a screw on hope you find it
It depends what year and model you have. Most civic just have a screw that holds the lens on. Once you unsrew it the bulb can be pulled out and replaced.