Either a BR8EG or a BR8ES with the "S" simply indicating the contact tip of that plug is solid on top, otherwise there is no difference.
(Actually, the "S" in that part # indicates that it's a standard 2.5mm center electrode. The "G" would indicate that plug is a fine-wire electrode. They *DO* make a "BR8EG" and a "BR8EG Solid" which is what I believe you're speaking of.)
NGK
.035 gap. DPR8ea-9 spark plug
SPARK PLUG (DR8ES) (NGK) SPARK PLUG (X24ESR-U) (DENSO)
Depends on what we are talking about. There is the Honda Recon 250 ATV with a single cylindar engine, the spark plug is located at the cylinder head. The Honda Hornet motorcycle is a 4 cylindar bike with the spark plugs at the side of the cylinder heads. Then there is the single cylindar Honda Nighthawk 250 one cylindar motorcycle with the spark plug located at the side of the cylinder hear. The spark plug is easily located on any vehicle as it is visible by a thick wire and a (usually) rubber spark plug cap.
1997 Honda Cr250 2 Stroke Spark Plug Gap; this info is directly from the Honda Manual: 0.5 - 0.6 mm (0.020 - 0.024 in) Spark Plug Recommended: NGK - BR8EV
The spark plug gap for a 1986 Honda CR250 should be set at .024 inches. This is equal to .6 mm.
puedo usar ngk v power10 en el cr 250 1998
manual says .8 to .9mm or .032 t .035 in.
According to the Honda owner's manual, the gap should be 0.60 - 0.70mm (0.024 - 0.028 in).
What is the spark plug gap on a kawasaki mojave 250
Brand NGK Type: CR5HSA just got some for mine
my kx 250 is not getting spark