.035 for points type ignition and .045-.050 for duraspark ignition
0.9mm.
SPARK PLUGS ARE NOW PRE SET AT MANUFACTURE. THE GAP SHOULD BE 0.7MM. BUY NEW ONES AND THEY ARE SET CORRECTLY.
P0306 Cylinder 6 Misfire Detected
The 300 cubic inch / 4.9 liter inline 6 cylinder engine was one of the choices
yes
What is PO 306 in my 2002 Ford Ranger V6 3.0L
Anyone? I have not found the plug either.
plug it
Master Brake cylinder replaced and lines bled-how long?
The gearbox oil fill plug can be located, in your Peugeot 306 2.0, on the top of the gearbox nears the back. The plug can be removed with a three-quarter inch socket
it is a 5 minute job and no you dont have to strip the engine down . Just follow the four spark plug leads to the plug do one at a time so you dont mix the leads up remove lead by pulling it off the plug remove plug with proper size sparkplug spanner or socket put new plug in but check the gap is correct usally you can get this from any shop that sells the plugs some are preset tighten to reasonable tightness put lead on and do the same with the rest. hope this helps ..
go on bing.com