The standard height for a wall mixer for a shower can vary depending on factors such as the height of the users and the design of the shower itself. However, a common range for the installation height of a wall mixer is between 1000mm to 1200mm (39 inches to 47 inches) above the finished floor level. This height range allows for ease of access and use while standing in the shower, while also accommodating different showerhead heights and shower arm lengths.
It's important to note that local building codes and regulations may dictate specific installation requirements, so it's always a good idea to check with a licensed professional or your local building authority to ensure your shower is installed safely and in compliance with any applicable codes.
If you require any assistance with bathroom remodeling, please feel free to contact us at 1-425-307-5583.
Floor to Wall 42"
About 1.5 meters
minimum 8' in India standard 10' it can be more also
Generally, in the 4'-5' from floor range.
8' 1 1/8" or eight feet one and one eighth of an inch
Lean a ladder against a wall. Not too steep . . . Give it a nice angle, for safe climbing. The height is the distance between the ground and the place where it hits the wall. The slant height is the length of the ladder.
About 1.5 meters
The height of and interior wall (the ceiling) is 8ft. The width is up to you. There is no standard...
This depends on which assembly you talking about and how much of it and why. however, most of the time it is not possible, and removing a section of the wall in order to change a shower mixer unit has to be done
3 mts
About 2.5 metres.
standard height is 36 inches and if there is available wall space you should put it as close to the sink or shower/tub as possible.
The top of a window in a usual application in a wall that is 8' high is around 7'.
minimum 8' in India standard 10' it can be more also
As per the Italian standard, the standard height of the wall hung water closet is 420mm, Table top basin is 850mm
Mine is at 5 feet. I don't know if that's standard or not.
Mine is at 5 feet. I don't know if that's standard or not.
A shower rough-in usually refers to the distance from the wall to the center of the shower drain , measured out away from both walls in a shower to the center of the drain. It also maybe referring to the height and the center line of the placement of the shower valve.