0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is valve stem install height for 89' 360CID head?
Between 1.315-1.37
Where is the bleeder valve located on 2006 Chevy impala 3.5?
there is none If it is the same as the 2007 3.5, it will be beside the power steering pump. behind the hoisting bracket. it will have a black valve stem cap on it. unscrew the cap and mash the valve stem, Be careful, it has pressure.
On a 327 Chevy which groove does the valve stem seal go?
The o ring style seal goes on the lower groove, the valve keeper goes in the top groove.
Why would the rockers slide to the side of the valve stem after adjustment on a 1970 Chevy 350?
they are either too loose or worn out
Where is the valve stem of a car?
You may be referring to the valve stem on each wheel.
How to stop leack from a valve stem on a tire?
Fit a new valve stem.
Why would the valve stem on a Chevy cavalier tire rip causing tires to leak three times in a row?
Someone doesn't like you
Were is the tire sensor of a 2008 dodge avenger located at?
Attached to the valve stem inside the tire/wheel.Attached to the valve stem inside the tire/wheel.
How can you tell the difference between intake valve and exhuast valve on a 1987 Chevy 305 want to replace valve stem seals but intake and exhaust are different seals which one is which?
intake valves are the larger valves or if you count from from either end its number 2,3,6,&7 valve
How do you know you have a bent valve in a big block Chevy?
Well, it will pop out the carb, or exhaust, witchever valve is bent. Pull the valve covers off, and turn the motor over slowly, by hand. Make sure all of the valves are closing, or, the stem height is all the same at one point, on every valve. And remember, a burned valve, will act the same as a bent, or stuck valve. A cylinder leakdown test is the proper way to diagnose this, however, that requires a few specialized tools, which most people do not have in their garage.
Can you change valve stem seals on a Chevy 350 smallblock without pulling the heads?
Yes. Check with your local auto parts store for the necessary tools.
What is difference between stock and a scion?
the difference between scion and stock is that scion is the cut stem of a plant while stock is the stem attached to the ground
