In order to change a bulb in the tail light of a Chevy Celebrity you must remove the tail light assembly from the car. To remove the tail light assembly" 1. In the trunk next to the quarter panel there are nuts that hold the rear header on, the center nut holds the tail light assembly on. It will be in the center of the tail light assembly near the outer edge. Take the nut off and pull the tail light assembly out until the stud clears the body. 2. Pull the tail light assembly to the side to disengage the tabs from the backup light panel. 3. Twist the appropriate socket to remove it from the tail light assembly, then unplug the lamp and replace it. Reverse the steps to reinstall the tail light assembly.
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Remove carpet inside trunk that covers tail ligh assembly, then unbolt tail light assembly, remove the assembly and bulb fixture of the bulb you want to replace, replace bulb and re-install in reverse order.
Open the trunk. Loosen the black thumb latch wing nuts that hold the tail light assembly in place. pull the tail light assembly out. You should be able to acces the tail light bulbs to replace them.
You will need to remove the tail light assembly to gain access to the bulbs. Open the tail gate and remove the two small screws that hold the tail light assembly in place, then wiggle the tail light assembly out in the open. Now you can unlock and twist the bulb socket out to replace the blown bulb.
On a 2012 toyota Highlander, How do you replace tail light Assembly
Open the hatch door and locate the two screws holding the tail light assembly and pull the assembly out of the housing. Unscrew the cover assembly, remove and replace the bulb. Reinsert assembly and replace screws
From inside the trunk, pull away the felt trunk liner to expose the tail light assembly. Turn the socket COUNTER-CLOCKWISE to pop it out of the tail light assembly.
open the trunk, on the side by the opening you will see a round cover, pull that cover back, that will give you access to the screw that removes the tail light assembly. remove the tail light assembly, when you pull out the tail light assembly you will have access to all of the bulbs in the tail light. this is a 5 minute job, very easy.
Yes unfortunatly
Open the tailgate and look between the tail light assembly and the tailgates weather striping. You will see two galvanized Phillips head screws. Remove them and pull outward and the tail light unit will pop out. The bulbs are screwed into the back of the tail light assembly.