Want this question answered?
184 pounds of torque
185ft/lb to2004
the wheel bearings are press fit bearings you need to pull out the drums and take them and the new bearings to a machine shop they can press them in a few minutes and fairly cheep to do
90 N
what is the torque on front wheel bearings for 1998 honda accord
Bearings, They are in the metal wheel in the middle of the wheel to make it rotate around the truck axel. the wheels are usually solid if that's what your asking.
there is no actual torque setting for wheel bearings. when tightening axle nut, turn the wheel as you do it. this seats the bearing evenly. tighten the nut till the bearing is just starting to drag a little then back off so it is not dragging. then with one hand at top of wheel and one at bottom, rock the wheel so feel for any movement in the bearing. if no movement you have the proper torque needed. you then need to adjust axle nut (which should be a castle nut) until you can insert codder pin. adjust so the codder pin will go thru the hole in axle closest to where you stopped your adjustment it may need a littltle tightening or little backing off to acheive this. then spin wheel again to check that it will move freely
210 nm
I think it's 210ft-lbs.
tourqe on 2001 front wheel bearings
Page 278 2000 S430 Owner's Manual: Wheel mounting bolt tightening torque 110 ft.lb. (150 Nm).
Lug Nuts? 100 Ft lbs.