~30 Nm I should guess would do the thing. Most important is to tighten "crosswise" and go in small steps until you reached the final torque.
the specs on the cylinder and the head is between 18 and 20 lbs
The cylinder head bolt torque specification is 90 pounds. The cylinder head bolts should be torqued in 30 pound intervals.
the torque spec for a 1997 cr125 cylinder head is 20ft pounds of torque.
18 ft lbs. on both.
The 1990 Ford Festiva 1.3 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
The 2000 Kia 2.0 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
hi i belive them to be 115 to 125 nm, that is what the setting is in my manual
2004 RM 125 Head Bolt Torque is Initial 11 .0 lb-ft, Final 18.0 lb-ft
115 - 125
on my '03' 125SX the head bolts should be 18nm.
a torqe wrench
DX & LX 4 cylinders have 125 H.P. 145 lb/ft torque.=EX 4 cylinder has 130 H.P. and 144 lb/ft torque.==SE 4 cylinder has 140 H.P. and 150 lb/ft torque.=