Want this question answered?
What do you torque the head bolts on a 1998 nissan altima 2.4 l
The 2001 Nissan valve cover bolt torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
The Nissan Ultima center console can be removed by removing the retaining bolts. There are four retaining bolts on the bottom of the console.
You have to be underneath the car and have very nimble hands.
32ftlbs for the pin bolts
what are the torque for camshaft and cylinder head bolts please
The bolts have a number on it, what is the number? There is a general torque spec in the shop manual that will say what the torque is based on that number
The 1997 Nissan Altima 2.4L is equipped with the RE4F04A 4-speed automatic transmission. This transmission fluid pan and gasket assembly has 21-bolt holes.
Short bolts-46psi , long bolts- 43psi plus 90 degrees
two large bolts behind the rotor wich also holds the caliper
25 NM to 30NM
Get a manual; they are cheap and you will need it if you are that far into a build. - - - - - If you have a camshaft with a bolt-on gear, one or the other should have come with torque specs. Stock Type 1 cam gears are riveted to the camshaft.