Want this question answered?
The torque on my 1993 is 46 ft lbs.
Torque is 26, 41, 52 ft/lbs. (second pass), 52 ft/lbs (final)
so the head wont warp
You can, but I would advise against it. The old bolts have streatched and you should install new head bolts.
first: 26 second: 41 third: 52
46-50 ft.lbs. 46-50 ft.lbs.
torque flight transmission
torque converter control
you can find it at autozone.com
the proper torque specification for the geo storm 1.6 engine is 58 ft lbs ... Always torque in a spiral from the center outwards. Make sure you cleaned up the threads in the block ith a chaser (NOT a tap) before proceeding. And oil the threads on the new head bolts. You should be able to turn the bolts all the way snug with your fingers if the threads are cleaned up correctly. Then torque in 3 stages to the final torque in a spiral from the inner bolts.
its standard from sprints to geo metros all years (1.0L engines), cylinder head-to- block bolts is 54 ft.lbs.,,, 73nm as listed in the chilton's book #28700 from your local auto parts store.
33 Ft. lbs