Want this question answered?
Remove the driveshaft from the back of your Chevy transmission. Remove the transmission mount retaining bolts. Remove the retaining bolts from the Bell housing. The transmission can then slide backwards. Don't forget to unbolt the torque converter from the flex-plate and remove the torque converter with the transmission.
55ftlbs
You need to remove the lower transmission inspection cover.
If the bolts are 3/8-16, the torque would be 50 ft/lbs. If 7/16, 65 ft/lbs.
Generally there is six bolts holding the transmission bellhousing to the engine block. There are several more holding the torque converter to the flex plate and the rear transmission mount to the crossmember.
Pistons don't have bots. More information is needed.
It's between the engine and transmission. It slides onto the input shaft of the transmission and bolts to the flexplate on the engine.
What is the Torque setting on transmission pan bolts 2002 ford ranger?
You have to pull the transmission. then it's just 3 bolts/nuts through flywheel.
there is usually a metal plate on the transmission itself with that information on it, or you can tell by the number of transmission bolts you have in the transmission pan.
torque wrench
A majority of Transmisson Pan bolts torque to 10 - 13 Ft Lbs