Want this question answered?
12 pounds is good
What is the Torque setting on transmission pan bolts 2002 ford ranger?
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
Torque converter bolts No. Fly-wheel bolts YES.
Nothing over 35 ft./lbs.
Tighten in a criss-cross pattern to 150 inch pounds. Mark
The Haynes manual says the transmission pan bolts should be torqued to 10 ft/lbs.
9ft pounds
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
There are many different bolts on a transmission. Need to know which ones.
what is the torque on the bolts for the transmission pan on a 1991 ford thunderbird 3.8
There are either eight or ten bolts on the head of Jinma tractor. The torque bolts require 95 to 105 foot pounds.