0
What is the torque pressure on 1988 Dodge Ram 318 engine head bolts?
Job113
105 ft/lbs. There should be 10 bolts per head. You tighten them in a zig-zag pattern. Start with the center going from inside to outside. Next, tighten the bolts to the left of center, inside to outside. Then the ones to the right of center, inside to outside. Then to the left end, and lastly the right end. Good Luck The above answer is incorrect. The correct torque is 85 lb/ft. Look at the link below.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What is the torque for an 1986 Dodge 318 rod bearing bolts?
the correct torque for these bolts is as follows: 96lbs
How much is the torque of 2c cylinder head bolts Toyota?
torque for 2c engine cylinder head bolts
How do you remove the engine from a 98 dodge ram 5.9L from torque converter The flywheel is in the transmission housing by about 2 inches and I cannot get at the bolts at flywheel torcque converter?
You have to pull the stater and grind a space in the adaptor for a socket to clear to the torque convertor bolts.
What are the engine torque specs for a c15 cat engine?
A C15 Caterpillar engine has dozens of torque specifications for many different engine bolts. The head bolts should be torqued at 350 pounds.
What is Bolts torque on 407t ade engine?
Conrod bolts
What are the head bolt torque specifications for a 1987 Dodge D100?
The head bolt torque for the Dodge 6 cylinder and V-8 engines is 50 ft. lbs. torque. If it is a diesel engine, the torque is 90.4 ft. lbs. Tighten the bolts by working from the center out, and alternating side to side. This prevents warping of the head.
How do you change water pump on 3.5 liter intrepid?
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.
What are the torque specs for the head bolts on a 2007 dodge charger 3.5 liter engine?
45, 45, 65 ft lbs + 1/4 turn.
Torque specs 4.7 Dodge Durango head bolts?
Torque specs can be found in the Haynes Auto Manual.
What is the torque specification for the cylinder heads on a 2000 dodge ram 1500 5.9 liter 4x4?
95 ft/lbs using engine oil to lube the bolts.95 ft/lbs using engine oil to lube the bolts.
What is the torque for oil pan bolts on a 1996 dodge Dakota?
215 in. lbs
What is the torque sequence of your head bolts for a Cadillac 4.5 engine?
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
