how to replace the rod bearings in a 1996 saturn 1.9 still in the car
Connecting rod bearings and main caps
First pass 11lbft, 22....33lbft then additional 90 degrees
From:http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain1993 Pontiac Lemans-Import 1.6L TBI SOHC 4cylApplication:Cylinder head bolt torque sequenceNote :Torque sequence ----------------| 8 4 1 5 9 || 7 3 2 6 10 |----------------Step 1: Torque in sequence 18 Ft/LbsStep 2: Torque in sequence 60 degreesStep 3: Torque in sequence an additional 60 degreesStep 4: Torque in sequence 30 degreesrecheck final torque in sequence>*** CAUTION ***
The torque sequence is 25 ft lbs, 50 ft lbs, 50 ft lbs, and a 90 degree turn.
okay this is a long but correct answer. In sequence 22 ft-lbs. In sequence 37 ft-lbs DOHC models and 33 ft-lbs on SOHC models. Finally, in sequence, tighten all bolts an additional 90 degrees, or a 1/4 turn. Here is the sequence, the number to the left are the timing chain side.8-4-1-5-97-3-2-6-10 (DOHC MODELS)8-4-1-5-97-3-2-6-10 (SOHC MODELS)
16 ft-lbf based on link below (for SOHC) http://www.saturnfans.com/forums/showthread.php?t=44221
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
If 8th VIN digit match, then yes
Valve cover torque spec for 4.0 SOHC is 89 in-lbs. - Haynes Repair Manual #36071. This manual is for Ford Ranger Pick-ups, 1993-2005 models, but DOES include torque specs for the 4.0L SOHC engine.
Yes
how to replace lifter saturn 2002 1.9l sohc
is it DOHC or SOHC 2 overhead cams or 1 if they are the same DOHC or SOHC then yes most years will fit and 99 and 98 will absolutely fit